Wireless Charger Recall: Belkin, Apple, and Other Brands to Know

Belkin recalled approximately 285,000 Boost Up wireless charging pads in 2022 because the units can overheat, posing a fire and burn hazard. The affected model is the F7U010. Flip your charger over and look at the model number printed on the back. If it says F7U010, stop using it and file a claim through Belkin for a free replacement or refund. The recall was coordinated with the U.S. Consumer Product Safety Commission (CPSC).

In 2022, Belkin voluntarily recalled its Boost Up wireless charging pads in cooperation with the CPSC. The recalled product is model F7U010, a 10-watt wireless charging pad sold between 2018 and 2022. The issue is internal — under certain conditions, the charging pad can overheat significantly, creating a fire hazard and risk of burns to anyone who touches the pad while it is running hot.

Around 285,000 units were sold in the United States through major retailers including Amazon, Best Buy, and Apple stores. The pads are typically black or white and sit flat on a surface. Belkin proactively reached out to known purchasers but not everyone who bought one registered their product or shopped through traceable channels, so many affected units are still in use.

There were reports of the pad becoming hot enough to cause burns and at least one incident involving fire damage to a surface. Belkin took the recall seriously and is providing free replacements and refunds. The CPSC listing for this recall can be found at cpsc.gov by searching for Belkin wireless charger.

Checking whether your charger is affected takes about 30 seconds. Pick up the charging pad and flip it over. On the underside, you will find a label with product information — this is where the model number lives. Look for something that starts with F7U010. If your charger shows that model number, it is part of the recall.

If the text is hard to read, use your phone flashlight or magnifying glass — the print can be small. The label might also show the serial number, voltage specs, and regulatory marks. You only need the model number for the recall check.

Once you have the model number, you can cross-reference it at cpsc.gov/recalls. Search for "Belkin wireless charger" and you will find the official recall page with a full list of affected model variants and photos to confirm you are looking at the right product. If there is any doubt about whether your specific unit is covered, contact Belkin directly — their support team can confirm based on serial number.

First: stop using it. Unplug it from the wall and set it aside. Do not continue charging your phone on it while you figure out next steps, and do not leave it plugged in unattended — that is when overheating incidents tend to happen.

Next, head to belkin.com and navigate to their recall or support page. Belkin has set up a dedicated claims process for F7U010 owners. You will typically need to provide proof of purchase (or at minimum, the serial number from the unit) and your shipping address. Belkin will send a prepaid return label and either ship you a replacement charging pad or issue a refund depending on availability.

If you no longer have the receipt, do not let that stop you from submitting a claim. Belkin has handled cases without purchase receipts, especially when the serial number is verifiable. The process is straightforward and does not require you to contact a third party — go directly through Belkin.

Once you receive a replacement, dispose of the old unit properly. Do not donate it or pass it along to someone else — it is a recalled product and should not be used by anyone. Check with your local electronics recycler for safe disposal options.

The Belkin recall gets most of the attention, but it is not the only wireless charger safety concern out there. A large portion of the wireless chargers on the market — particularly the cheap ones sold on Amazon with no recognizable brand name — skip certification entirely. Qi certification from the Wireless Power Consortium means the charger has been tested for safety and interoperability. MagSafe certification from Apple means it has been tested specifically for iPhone compatibility. Chargers without these marks have not gone through that testing process.

The problem with uncertified chargers is unpredictability. They may work fine for months and then develop a fault. Common warning signs that your wireless charger is behaving dangerously:

The charger feels hot to the touch after your phone has been on it for a while. Warm is normal; hot enough to be uncomfortable is not. Your phone battery drains while it is sitting on the charger, which suggests the charger is not delivering power properly and both components are working harder than they should. You smell anything that resembles burning plastic or electronics. That smell is not subtle — if you notice it near your charger, unplug it immediately.

These signs apply to any wireless charger, not just recalled ones. If your charger exhibits any of them, retire it even if it is not on an official recall list.

Most wireless charging fires and injuries are preventable. A few habits go a long way.

Buy certified chargers. Look for the Qi certification mark on the packaging or product listing. For iPhones, MagSafe or Made for MagSafe accessories have passed Apple testing. The price difference between a certified charger and an uncertified one is usually small, and the safety difference is significant.

Do not charge under pillows or in bedding. This sounds obvious but people do it constantly — they put their phone on a charging pad under the pillow so it is within reach. Fabric traps heat. The charger and phone both run warmer than they should, and in a worst case the heat cannot dissipate. Charge on a hard, open surface.

Remove thick or heat-trapping phone cases when charging wirelessly. Not all cases cause problems, but cases designed primarily for drop protection — especially ones with rubber backs — can trap heat between the case and the charger. If your phone gets noticeably warm during wireless charging, remove the case.

Unplug the charger when you are not using it. There is no meaningful benefit to leaving a wireless charger plugged in when nothing is on it. It draws a small amount of power and is one more thing running in your home unnecessarily. Make it a habit to unplug when you leave for the day.

Check your charger periodically. If the pad has any visible damage — cracks, scorch marks, discoloration — retire it. A charger that shows physical signs of heat damage has already exceeded safe operating conditions.

RecallRadar monitors wireless charger recalls and other consumer electronics safety actions so you do not have to check the CPSC website manually. When a new recall drops that matches a product you have registered, you get notified.

Add your devices at recallradar.co/register Get ongoing recall alerts at recallradar.co/alerts